$89.95 excluding tax

1 in stock

Binary™ 300 Series HDMI over Cat5e/6 Receiver Wall Plate

If you want to extend HDMI from a B-300-HDMATRIX Switcher over long distances, but don’t want the mess of connectors and cables behind your flat screen, then cut the clutter and get a cleaner install with the Binary™ HDMI Single Cat 5e/6 Wall Plate Receiver with Bi-Directional IR. It receives full HDMI 3D and is capable of bidirectional IR – up to 130 feet over a single Cat5e/6 cable. The recessed, in-wall design makes the most out of the shrinking space behind TVs, providing room for bulky connectors. There’s even a remote powering option to eliminate the need for a power supply behind the TV.

1 in stock

SKU: B-320-HDMATRIX-RCV-W Category: Tag:


Important Note – This product does not fit metal junction boxes. Instead, we recommend using an LV1. Shielded CAT5e/CAT6 and shielded RJ45 connectors are strongly recommended for this product. Unshielded or improperly terminated cables may be susceptible to video dropout problems from ceiling fans and other EMI issues. Please note: for proper shielding, shielded connectors must be used with drains connected at both ends. In addition, “EZ end” connectors are not recommended for use with HDMI extenders.

Power Supply – Binary 1 Cat HDMI extenders use a 5 Volt DC power supply. Binary HDBaseT extenders use a 24 Volt DC power supply, and matrix switchers with integrated Cat 5 extenders use 12 Volt DC supplies. Using any 12 or 24 Volt DC power supply with any 5 Volt Binary products will result in damage to the product and possibly the power supply. Be sure to use the correct power supply with the correct product.

Additional information

Weight 1.31 lbs

Go to Top